Advertisement
Table of Contents
- 1 Parts
- 2 Parts Needed
- 3 STEP 1. Align the Trays with the Holes on the Center-Beam by Matching the Coordinating Labels.
- 4 STEP 2. Remove the End Cap from Your NV Base 2.0.
- 5 STEP 4. Using an 8Mm allen Wrench Alternate Tightening the Bolts.
- 6 STEP 5 Reattach the End Cap to the Rack.
- 7 Küat Rack Warnings
- 8 Küat no Worries Warranty
- Download this manual
Advertisement
Table of Contents
Related Manuals for Kuat NV BASETM 2.0
Summary of Contents for Kuat NV BASETM 2.0
- Page 1 NV BASE ADD-ON...
- Page 2 Parts: Add-on Center Beam Outer Front Tire Tray Inner Front Tire Tray Outer Rear Tire Tray Inner Rear Tire Tray Included in the parts box: 8mm Allen Wrench 6mm Allen Wrench 3x M8x160 Bolts 4x M8 Nut Bottle Opener 3x Keys Key-chain...
- Page 3 STEP 1. Align the trays with the holes on the center-beam by matching the coordinating labels. Then alternate between bolts to tighten. Parts Needed: 4x M8 Nut 3x M8x160 Bolts NOTE: The trays with the “..Küat..” Logo will be farthest from the hitch. Performing this step with the rack upside down will ease assembly.
- Page 4 STEP 2. Remove the end cap from your NV Base 2.0. STEP 3. Connect the Add-on to the NV Base 2.0 while aligning the bolts with the threaded holes found in the center beam on the NV.
- Page 5 STEP 4. Using an 8mm allen wrench alternate tightening the bolts. NOTE: Tighten the bolts and check bolt tightness periodically. STEP 5 Reattach the end cap to the rack.
- Page 6 Our “No Worries Warranty” has you covered like the poncho in your backpack or the winch on your bumper, there when you need it. The goal? To ensure your Kuat product performs as intended, over time, every time, for life.
Need help?
Do you have a question about the NV BASETM 2.0 and is the answer not in the manual?
Questions and answers