Step 4: Playing A Disc; Hookups; Hooking Up The Player; Step 1: Connecting The Video Cords - Sony DVP-F25 Service Manual

Step 4: Playing a Disc

The labeled (or non-playback) side
appears through the disc window.
A Turn on the TV.
B Press [/1 on the player.
C Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
D Insert the disc in the player so that
the labeled (or non-playback) side
appears through the disc window.
E Press N.
The player begins playing the disc.
16

Step 1: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
Component video
cord (not
supplied)
(green)
(green)
(blue)
(blue)
(red)
(red)
TV, projector or AV
amplifier (receiver)
(red)
(blue)
(green)
to COMPONENT
VIDEO OUT
CD/DVD player
(yellow)
(yellow)
(yellow)
Audio/video cord
TV, projector or AV
(supplied)
amplifier (receiver)
TV
EURO AV adaptor
(supplied with some
models)
l : Signal flow
18
After Step 5
Depending on the disc, a menu may be
displayed on the TV screen. If so, select the
item you want from the menu and play the
DVD (page 35) or VIDEO CD disc (page 36).
To stop playing
Press x.
To remove the disc
Press A.
Remove the disc from the player.
To turn off the player
Press [/1. The player enters standby mode
and the power indicator lights up in red.
S VIDEO
cord (not
supplied)
TV, projector or AV
amplifier (receiver)
Control S cord (not
supplied)
TV or video component
with CONTROL S jack
to S VIDEO
to CONTROL S IN
OUT
to VIDEO
OUT
(yellow)
(yellow)
Audio/video cord
(supplied)

Hookups

Hooking Up the Player

Follow Steps 1 to 5 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords, check that you have all of the supplied accessories,
and insert the batteries into the remote (page 14). Remove the jack cover (page 10).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 22). (Do this if you are
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a SCART (EURO AV) input jack
Connect the supplied EURO AV adaptor to the SCART (EURO AV) input jack of the TV and
connect the player and the EURO AV adaptor using the audio/video cord (supplied). Connect
the yellow plugs of the audio/video cord to the yellow (video) jacks. Use the red and white plugs
to connect the audio input jack (page 22).
TV
EURO AV adaptor
D If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, C
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
Green
Blue
Red
If your TV or video component has a CONTROL S connector
You can control the player by pointing the remote at the remote sensor on the TV or video component. This
feature is convenient when you placed the player and the TV or video component away from each other.
Connect the TV or video component via the CONTROL S IN connectors using the control S cord (not
supplied). Refer to the instructions supplied with the component to be connected.
1-4
c continued
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
Yellow (Video)
White (L)
White (L)
Red (R)
Red (R)
, C )
B R
Green
Blue
Red
c continued
17
19