Table of Contents
Advertisement
9.5 Power Outages
If power outages occur frequently at the printer site, it is advisable to install a UPS system. The UPS system must be
installed on the main power to the printer and must conform to Printer Power Requirements.
9.5.1 Power Outage During Printing
1. Turn the CMYK and White air valves to the OFF position.
2. Reposition the carriage over the maintenance station, making sure that the carriage is positioned properly at the carriage home
position.
3. Turn OFF the media vacuum switch, the system switch and the printer main breaker.
9.5.2 Power Outage While Printer is Idle and Attended
1. Turn OFF both the CMYK and White air valves.
2. Power OFF the media vacuum switch, the system power switch, and the printer main breaker.
9.5.3 Power Outage While Printer is Idle and Unattended
If a power outage occurs while the printer is idle and unattended, the printer may drip ink into the maintenance tray. If the
power is restored while the printer is unattended, the printer reboots but remains in the idle position. Refer to Initial Startup
Procedures for start-up instructions (section
Document ID: OMM-00148 Rev. B
).
5.1
83
Advertisement
Table of Contents
