General Safety; Emergency Stop Button(S) - EFI Pro 24f Operation Manual

2.0 General Safety

This chapter explains how to safely use your EFI Pro 24f printer, including the access panels, shields, and warning labels, as
well as how to properly handle printer inks and fluids. Before operating the printer, all personnel must:
• Be a certified EFI Pro 24f operator.
• Read and understand the EFI Inkjet Printer Safety Guide, http://inkjet.support.efi.com/doc.php?doc=683, and adhere to all
safety precautions therein.
• Read and sign the UV Safety Acknowledgement Form.

2.1 Emergency Stop Button(s)

In case of an emergency, immediately press any Emergency Stop button to stop the printer.
Identify locations and understand operation of emergency stop buttons before operating the EFI Pro 24f printer. Emergency stop buttons
are located on both the right and left sides of the front and rear print areas. When pressed, an emergency stop button does the following:
• Shuts off UV lamps
• Stops all printer mechanical movement
• Stops unwinder and rewinder
Danger! Pressing an emergency stop button does not disconnect power from the printer or its electronics. Never use
emergency stop buttons as an alternative to powering down the printer. The emergency stop buttons are for
personal safety and to avoid printer damage during extraordinary circumstances.
Document ID: OMM-00148 Rev. B
Front of EFI Pro 24f
Figure 2-1: Emergency Stop Button Locations
Rear of EFI Pro 24f
11