Page 1
MULTI ENTRY UNIT Model No. DRC- OSC / OSB • Thank you for purchasing COMMAX products. 513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea • Please carefully read this User’s Guide (in particular, precautions for safety) Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 before using a product and follow instructions to use a product exactly.
Table of Contents Warnings and caution 1. Features 2. Part names and Functions 3. Calling In-house unite by resident Number 4. Calling guard station 5. Calling / talking duration 6. Open the entrance with PIN Number 7. Setting the ID for Multi-Entry Panel 8.
It may cause an electric shock. It may cause a fire, an electric shock Otherwise, it may not function plug immediately and contact or an injury due to malfunction of the properly. Commax service center. product.
Page 4
1. Features 2. Part Names and Functions. 1)LCD size : 128x 64mm (key pad type) 2)Function of door release 3)Connect up to 4 Multi Entry Panels with outside distributor (CCU-OS). 4)Night automatic illumination - white LED illumination (built-in Camera) 5)Manual camera angle control 6)Full duplex 7)Power source : DC24V~DC28V 8)Temperature limit : -10℃~ +40℃...
This is the Entrance unit that is connectable to up to 4 units with a Outside Distributor(CCU-OS) . 6. Open the entrance with PIN Number It can be connected with the outside distributor unit (CCU-OS) which connects to 4 outside Multi Entry Panels through it and this is multi house system be Note: The door can’t be open by default passwords, “1234”...
2) Changing Building Password (default password : “4321”) ① Press “Building Number” and “building button” 7. Setting the ID for Multi-Entry Panel ② Enter “9900” and then hold “ ” button for 2 seconds and release when LCD stops blinking. The default of all Multi Entry Panels is assign to “0”.
☞ Please pay attention to the polarity of the wires. Units will not work properly when mis-wired 1) Outside Distributor(CCU-OS) : One Outside Distributor is connected up to 4 ☞ DC-24V~28V is needed for DRC-OSC/OSB Multi Entry Panels and 1 guard station. ☞ Cable for DRC-OSC/OSB is UTP(0.5).
3)System diagram 11. Specification Item DRC-OSC/OSB Wiring To Outside Distributor: 8-wire(talk 2, Data 2, Video 2, Power 1, GND 1) Power voltage DC 24V~28V 1A ( RF-2A) Power should be supplied separately Transmission Method Duplex System Screen dimension 128x64 GRAPHIC LCD...
Need help?
Do you have a question about the DRC-OSC and is the answer not in the manual?
Questions and answers