Chapter 3 Installing And Connecting The Router; Installing And Connecting The Router; Safety Warnings; What You Need To Know - Cisco 1100 Series Hardware Installation Manual

Installing and Connecting the Router

•
Installing and Connecting the Router
This document describes how to install and connect the Cisco 1100 Series Integrated Services Routers (ISRs)
to LAN and WAN networks. The following sections provide technical details.

Safety Warnings

Read the installation instructions before using, installing or connecting the system to the power source.
Warning
Statement 1004

What You Need to Know

CLI Console Access
Use the USB or RJ-45 console port on the router to access the Cisco Internet Operating System (IOS-XE)
command line interface (CLI) on the router and perform configuration tasks. A terminal emulation program
is required to establish communication between the router and a PC. See the Connecting to a Console Terminal
or Modem for instructions.
A Microsoft Windows USB driver must be installed before you establish physical connectivity between
Note
the router and the PC.
Slot and Port Numbers
The routers have built in ports and slots. See the About Slots and Interfaces section for slot and port numbering.
Installing and Connecting the Router, page 23
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
3
C H A P T E R
23