Hardware Installation Guide For The Cisco 1100 Series Integrated Services Router - Cisco 1100 Series Hardware Installation Manual

Integrated services router
Hide thumbs Also See for 1100 Series:
Table of Contents

Advertisement

Installing the Router
The unit must not be mounted with the output ports facing downwards. You must mount the unit with the
Note
cables going sideways.
Figure 6: Mounting on the Wall
1
To attach to a wall stud, each bracket requires one number-10 wood screws (round- or pan-head) with
Note
number-10 washers, or two number-10 washer-head screws. The screws must be long enough to penetrate
at least 1.5 inches (38.1 mm) into the supporting wood or metal wall stud.
Note
For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and washers
must be size number 10. Route the cables so that they do not put a strain on the connectors or mounting
hardware.

Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router

26
Installing and Connecting the Router
Key-hole slots

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents