TOHATSU MFS 40A Owner's Manual page 63

Item
Steering
• Check the operation of the steering handle.
Devices
• Check if the anode is securely installed.
Other parts
• Check the anode for corrosion and deformation.
ENOM00081-A
Oil level checking
If the oil level is low, or too high, the life
of the engine will be shortened signifi-
cantly.
1. Stop the engine and set it in a verti-
cal position.
2. Remove the top cowl.
3. Remove the dipstick after 5 minutes
engine has stopped.
4. Wipe oil off the oil dipstick with a
clean rag.
5. Put in the dipstick.
6. Take out the dipstick and check the
oil level.
7. Return the dipstick.
1
1. Filler cap
2. Dipstick
Points to Check
1. Upper level 2200 mL
2. Lower level 1700 mL
ENON00024-0
Note
The oil level should be checked when the
engine is cold.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears con-
taminated.
ENOM00082-A
Engine oil replenishing
ENOW00079-A
Do not add engine oil of brand and grade
2
other than existing one. In case engine oil
ENOF00920-0
of other brand or grade is added, drain all
oil and ask dealer for treatment.
In case other than engine oil such as gas-
oline is put in the oil chamber, empty the
chamber and ask dealer for treatment.
When replenishing engine oil, be careful
not to allow entry of foreign matters such
as dust and water into oil chamber.
INSPECTION AND MAINTENANCE
Remedy
Repair
Repair if necessary
Replace
1
2
CAUTION
63
ENOF00081-0
10