Mode Machines SEQ12 User Manual page 35

In select-part-mode, one out of eight save-able parts can be called up and played back. Given
that parts could equal song-parts, you will have a choice of intro, verse, break or outro, which
can all be called up to taste. Parts can additionally be switched „on the fly". The changeover to
the next selected part will be carried out after the sequence-chain of track 1 has been comple-
ted. The sequence-chain of track 1 is the timing-reference for such switching of parts.
Continuously press SONG to the reach select-part-mode.
The matrix shows:
active Part
active
Track(s)
muted
Track(s)
MATRIX-BUTTONS 1
The
eight available parts. The button of the current part is fully lit.
In this view, the matrix also displays the progress of the sequence-chain (in this case track 1).
• Lines 1 to 8 of columns 9 to 16 represent the 64 steps of the currently active
sequence-chain.
• The area of lines 9-10 and columns 9-16 displays the current step of the sequence
(track 1 which is the timing-reference)
In this example, part 1 is played back, currently step 4 of 28 sequence-chain-steps. Track 1 has
reached step 10 within the current sequence.
P L A Y I N G P A R T
1
current Step
of
Sequence-Chain
Parts
current Step of
active Sequence
to 8 of the first track are half-dimmed. They are assigned with the
35
last Step
of
Sequence-Chain
Display Section
for Sequences
SONG-MODE
Display-Section
for
Sequence-Chain
Steps
9