Function-Buttons With Track-Type Poly - Mode Machines SEQ12 User Manual

SHUFFLE View
5
0
Value
Shuffle-Value
for Step 1 = "3"
for Step 3 = "2"
for Step 5 = "0"
for Step 7 = "0"
CONTROL 1, 2
These functions generate MIDI-controller-data. The behavior is described under MOD (see
page 21).

8.4.2 Function-buttons with track-type POLY

The track-type POLY differs from MONO by its ability to use function-button 3 „CHO" (chord) to
additionally layer chords on top of the selected notes. Controller 3 („MOD") is not available.
The assignment of the function-buttons
CONTROL 1 and CONTROL 2
CHO
Enter chords here. Set the base notes for the chords in the NOTE and OCTAVE view (see page
20). By calling up CHO, you can now add up to to eleven additional notes per step. Please refer
to the figure on the following page.
Please note: All notes of a chord need to be within the range of one octave.
Subsequently, the chord may be transposed using the octave-function.
Active Note(s)
NOTE, OCTAVE, VELOCITY, LENGTH, SHUFFLE,
corresponds to a monophonic track.
23
SEQ-MODE
8