Mode Machines SEQ12 User Manual page 16

JAM-MODE
The following menu-function are available in JAM-mode:
TEMPO
Set the tempo using the
By pressing ENTER
always transmits MIDI-clock and MIDI-start- and -stop-commands.
S E T U P
d e f a u l t
(SETUP) LOAD
Here, you can load SETUP-data. SEQ12 offers 32 memory locations for setups. Use
DEC to select and
Please note: Loading setups will overwrite all current settings of the SEQ12. This is
irrevocable!
(SETUP) SAVE
You can save your setups here. Select the memory location using INC and DEC. Press ENTER to
7 activate the save routine.
A safety mechanism hinders you from accidentally overwriting data: After selecting a memory
location and pressing ENTER, you need to subsequently press YES/ADD (flashing) to carry out
the save process.
To cancel the save procedure, simply press the JAM-mode button.
Please note: Setups that have been accidentally overwritten end up in data-nirvana
beyond recall!
CVGATE FASTMODE
This mode allows adjustment of settings to connect to the CV/Gate-Interface by Mode Machi-
nes. To enable changed settings, you will need to switch the SEQ12 off and back on. In this state,
other MIDI-units cannot be operated at the corresponding port unless they support a
MIDI-transfer-rate of 250 kBaud.
INC and DEC buttons.
When set to EXTERN
T E M P O
1 2 6 b p m
ENTER to load.
L O A D
S A V E
, SEQ12 will sync to a received MIDI-clock. SEQ12
C L O C K
0
0
16
i n t e r n
INC and