Menu-Functions And Display - Mode Machines SEQ12 User Manual

SEQ-MODE

8.2 Menu-functions and display

Some functions in SEQ-mode need to be adjusted using the display and the navigation-cursor.
With SEQ-mode being selected by pressing SEQ, the display shows the sequence-selection-
menu. Select the sequence to be edited here.
• S01 shows the current sequence (S01 to S16). Carry out the selection using
• T01 displays the track where the current sequence is located (T01 to T12). The selection is
carried out using
In correspondence to the selection, the display will inform you about:
• the track-type (
• the type of MIDI-data being generated (
Attention: When changing from JAM-mode to SEQ-mode, both buttons are lit and the
display will show:
8
Now, select the desired sequence from the matrix and press SEQ again to open the menu for the
sequence-selection (see page 19)
Pressing ENTER
Track Type
M ON O
T01 S 0 1
Track
(UP / DOWN)
UP and DOWN.
MONO, POLY, DRUM
SELECT SEQUENCE
will open the sequence-edit-menu:
Track Type
MONO
T0 1 S 01
Track
Sequence
Select Mode
PAT T E R N
NOT E
MIDI Data Type
(Function Buttons)
Sequence
(DEC / INC)
)
NOTE, TRIG )
IN MATRI X
Edit Mode
E DIT
S T E PS 16
Parameter
(UP / DOWN)
18
DEC
Value
(DEC / INC)
and INC.