Mode Machines SEQ12 User Manual page 31

8.11 Recording notes and controllers using an external MIDI-keyboard
In alternative to the programming via the matrix, a MIDI-keyboard can be used to enter notes
and MIDI-controller-data.
To do so, call up one of the controller-views „CONTROL 1", „CONTROL 2" or „MOD" while in
SEQ-mode and activate RECORD. Now, the next received controller will be recorded to the
selected controller-track. This works with sequencer-playback being enabled or stopped.
• Recording of notes and controller-data with the sequencer running
In SEQ-mode, received MIDI-data of a connected keyboard will always be recorded to the
track being currently visible.
When in JAM- or in SONG-mode, recording will be to the last visible track.
Important: To record incoming MIDI-controller-data, the corresponding controllers
MOD, 1 or 2 need to be set upfront in the SEQ-edit-menu.
• Recording of notes and controllers with the sequencer being stopped.
Whenever RECORD
possible to select sequence-steps using
works for chords and controller-data.
TIP: In case three controllers are not sufficient and velocity has already been used,
another track of the SEQ12 can be configured in a way that this track's controllers
will also be routed to the targeted instrument. This second track may of course
feature a different timing which again can lead to interesting effects.
is enabled while the sequencer is being stopped in SEQ-mode, it is
DEC
31
(PLAY
/ INC to record incoming notes. This also
SEQ-MODE
& RECORD)
8