8. SEQ-MODE
The SEQ-mode is dedicated to program and edit sequences. Depending on the track-type being
selected, the function-buttons call up different views of the matrix to enter the corresponding
MIDI-data.
8.1 Matrix-function
In SEQ-mode, the matrix visualizes a single sequence. The 16 columns of the matrix contain
and represent the steps of a sequence.
In SEQ-mode, the whole matrix is used to visualize the different MIDI-data which can be en-
tered per step. This way, the vertical position of a step informs about the pitch of MIDI-notes.
Other MIDI-data such as velocity, step-length or controllers are visualized by vertical or hori-
zontal LED-bars.
Fnct-Buttons 1 – 8
show
MIDI Data Display
(here NOTE View)
Sequence Steps 1 - 16
Locator
active Notes
17
SEQ-MODE
SEQ Mode active
8
Need help?
Do you have a question about the SEQ12 and is the answer not in the manual?