Table of Contents
Advertisement
6. QUICKSTART
To checkout your SEQ12, please read and follow this quickstart first. Even though not all func-
tions are explained here, you will get a first impression of your SEQ12's workflow.
1.
Connect a synthesizer to MIDI-output 1. The unit should be set to receive on
MIDI-channel 1.
2.
Switch on the SEQ12.
3.
The unit now is in JAM-mode, With the default-setup being loaded. Only track 1 is active
because only the topmost function-button to the left is lit. The first sequence of track 1
is active (see matrix: button 1/1 is lit). The first sequence is also selected in all other
tracks (see matrix: buttons 1/2, 1/3, 1/4 etc. are lit).
4.
Press SEQ. You are now in a mode to select sequences. The JAM- and SEQ-buttons are
lit. The display shows
5.
Press the topmost left button (1/1) of the matrix to select the first sequence of the first
track to be edited.
6.
You are now in SEQ-mode. Here, the selected sequence can be programmed or edited. It
is empty currently.
7.
Start the sequencer by pressing PLAY. You should see the locator-bar advancing from
left to right.
The display shows the selection-windows for sequence (
the currently select sequence-parameter (
8.
Use the function-buttons (left) to select the sequence-parameter to be edited. Select
NOTE
(topmost function-button).
9.
Define a few notes in the matrix using the MATRIX-BUTTONS. You should now hear a
note-sequence.
10.
Now, select OCTAVE. Change the octave for the notes by pressing
on top or below a note being set.
11.
Select MOD. Set a few MIDI-controller-values by pressing
the corresponding step. Per default, MOD sends out MIDI-controller-number 1, i.e. the
modulation-wheel.
12. Change values for Velocity, Length or Shuffle resp. Control 1 and 2.
SELECT SEQUENCE IN MATRIX
Spurtyp
M O NO
T 0 1 S 0 1
Spur
(UP / DOWN)
Sequenz
(DEC / INC)
.
Auswahl-Modus
S01
) and track (
NOTE
) and the track-type (
PAT T ER N
NO T E
MIDI-Datentyp
(Funktionstaster)
MATRIX-BUTTONS
11
QUICKSTART
T01
) as well as
MONO
)
MATRIX-BUTTONS
above
6
- Quick Links:
- Appendix
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SEQ12 and is the answer not in the manual?
Questions and answers