mspa M-009LS Alpine Owner's Manual And Warranty page 19

NOTE:
● Low pH will damage the spa tub and pump. Damage resulting from the chemical imbalance will void the
warranty.
● High pH (hard water) will result in white coagulations inside the filter pump; which may lead to pump
damage.
IMPORTANT:
● MSpa Water Treatment kit is strongly
recommended for spa use.
● Press the
control panel to turn on the bubble air blower
and help to dissolve the chemicals into the water.
● Never mix chemicals together. Add the chemicals
to the spa water separately. Thoroughly dissolve
each chemical before adding one to the water.
MSpa Water Treatment Kit (* Optional)
● B0301858 MSpa Chemical Starter Kit (20 X 20g Bromine Tablets + 500ml Algaecide + Floating
Dispenser)
Disinfectant for water spas and pools. disinfectant, algaecide and bactericide.
● B0301859 Bromine Tablets - 50 X 20g Bottle
Slowly dissolve in water to provide active bromine sanitizer in the form of hypobromous acid.
● B0301860 Chlorine Granules - 1Kg Bottle
Adds isocyanuric acid to the spa water which resists chlorine loss from UV rays. Does not contain calcium,
can be used to sanitize hard water without increasing the calcium hardness. Contains troclosene Sodium,
dehydrate 100%.
● B0301861 Algaecide - 1L Bottle
Kills all types of algae, including green and mustard algae. Non-foaming algaecide for improving and
conserving water in spas. Contains polymeric quaternary ammonium chloride 7%.
● B0301862 pH Plus - 1Kg Bottle
For increasing the pH in the spa water. Contains sodium Carbonate 100%.
● B0301863 pH Minus - 1.5Kg Bottle
For decreasing the pH in the spa water. Contains sodium bisulphate 100%.
Bubble button on the spa
MSpa Water Treatment Kit
19