Table of Contents
Advertisement
3. HANDLING
CAUTION
Use the programmable controller in the operating environment that meets
the general specifications given in the user's manual of the CPU module.
Using this programmable controller in an environment outside the range of
the general specifications could result in electric shock, fire, erroneous
operation, and damage to or deterioration of the product.
While pressing the installation lever located at the bottom of module, insert
the module fixing tab into the fixing hole in the base unit until it stops.
Then, securely mount the module with the fixing hole as a supporting point.
Incorrect loading of the module can cause a malfunction, failure or drop.
When using the programmable controller in the environment of much
vibration, tighten the module with a screw.
Tighten the screw in the specified torque range.
Undertightening can cause a drop, short circuit or malfunction.
Overtightening of screws can cause damages to the screws and/or the
module, resulting in fallout, short circuits, or malfunction.
Completely turn off the externally supplied power used in the system before
mounting or removing the module. Failure to do so may damage the product.
Do not directly touch the conducting parts and electronic parts of the module.
This may cause the module to malfunction or fail.
3
Advertisement
Table of Contents
