Table of Contents
Advertisement
INTRODUCTION
Language
You can select from a number of different
languages for the display of information on the
screen and for the voice output for navigation.
The following languages are available:
-
DEUTSCH,
-
ENGLISH (IMPERIAL),
Measurements in yards,
-
ENGLISH (METRIC),
Measurement in metres,
-
ESPAÑOL,
-
FRANÇAIS,
-
ITALIANO,
-
NEDERLANDS.
18
Default settings
Use this menu to reset all the settings in the
Setup menu and the tone settings to the default
settings. This does not include the language
settings and the calibration.
If you select and confirm FACTORY SETTINGS
in the main Setup menu, you will be required
to confirm your selection again. The settings
will not be reset to the default settings until you
have selected and confirmed YES. The radio
navigation system will switch off briefly and
then back on again.
If you do not want to reset the unit, select NO.
If there is a navigation CD in the system, it is
also possible to delete the stored destinations.
If you want to use this option, select YES in
confirmation menu. If you do not want to delete
the stored destinations, select NO.
RADIO NAVIGATION SYSTEM
Advertisement
Table of Contents
