Tim, Use To Select Messages; Activating Tim Standby For 2 Hours; Listening To Recorded Messages; Selecting A Recorded Message - Skoda SatCompass Quick Reference

AUDIO OPERATION

Activating TIM standby for 2 hours

•
Park your vehicle, leave the system switched
on and turn off and remove the ignition key
from the ignition.
This standby mode will be deactivated as soon
as you switch the system back on again.
Note: Once the memory is filled to capacity,
the oldest message will be overwritten. If a
message is longer than four minutes in total,
the beginning will be overwritten.
28

Listening to recorded messages

•
With the system switched on, press TIM
The TIM display will appear. TRACK and the
number of the message recorded last will appear
in the display foreground. The message recorded
last has the highest number, the oldest message
the lowest. The recording time appears in the
status line next to the source.
If no traffic information has been recorded,
.
NO MESSAGE will appear in the display fore-
ground.

Selecting a recorded message

•
While a message is being played back, press
one of the buttons to listen to the previous
or the next message.
RADIO NAVIGATION SYSTEM