Clock Setup - Skoda SatCompass Quick Reference

- ALPH. DEST. MEMORY activates the
alphabetically sorted destination memory.
- GPS STATUS indicates the number of
GPS satellites currently received and your
geographical position.
- TOGGLE TIME INFO allows you to switch
between the display of the arrival time or the
remaining driving time in the Info window.
- SHOW LOCATION, route guidance is
provided by indicating the direction in which
your destination is located and the name of
the street or road you are currently travelling
on, if applicable.
When you access this menu, the selection bar
will mark ROUTE GUIDANCE. The function
currently assigned to the Macro button will be
marked by an arrow.
RADIO NAVIGATION SYSTEM

Clock setup

Use this menu to set the system time. It is not
possible to alter the GPS TIME menu item. It
is used to calculate the system time via GPS
reception. If the GPS time is available, it will not
be possible to alter the system time manually.
INTRODUCTION
TIME ZONE - This is where you can enter the
time difference between your current time zone
and world standard time (UTC), (see page 64).
DAYLIGHT SAVING TIME - Select ON if you
are in a country where daylight savings time is
in effect.
SYSTEM TIME - Use the menu knob
the menu item SYSTEM TIME and confirm your
selection. Now turn the knob to alter the hours. To
alter the minutes press the menu knob
Turn the menu knob to alter the minutes and
press it to exit this menu.
Note: You cannot alter the system time unless
it is not possible to receive GPS time.
The time zone and summer time must be
adjusted manually.
to select
again.
17