FeiYu Tech G4 Plus Operation Instructions

G4 Plus 3-Axis Handheld Gimbal for Smartphone
G4 Plus compatible with iPhone 6s Plus/ 6s / 6 Plus / 6 / 5s / 5c / 5 / 4s /4
and other smartphones with similar dimensions
1
User Guide
! Attention !
1
Insert The Batteries Insert The Batteries
Remove the power Remove the power
switch cap, insert two switch cap, insert two
batteries into the handle. batteries into the handle.
Adjust The Center of Gravity
3
R
If the smart phone inclines towards
the tilting axis, pull it towards the left
to be in place, and let the center of
gravity keep balance or slightly incline
Tilting
to the smart phone. If the smart phone
Axis
still inclines towards the pitch axis,
install the clump weight.
Standard Installation Method
* Light *
Light
iPhone 6s iPhone 5
iPhone 6 Plus
iPhone 6 iPhone 4
0 mm 9 mm
iPhone 6s / 6 Installation iPhone 5s / 5C / 5 / 4s / 4 iPhone 6s Plus / 6 Plus
Installation Installation
*
Use Light Counter Weight
* Use Heavy Counter Weight
*
Use Light Counter Weight
2
Product Overview
Tilting Axis
Pitch Axis
Panning Axis Heading Axis
Function Button Function Button
Power Switch
Power Switch
(1) Please install the suitable smartphone first before power on the gimbal.
(2) Please turn off the power when not in use.
2 Install The Smartphone Install The smartphone
Install the Smart phone Install the Smart phone
by the quick-release by the quick-release
adapter. And make adapter. And make
sure it is fixed well. sure it is fixed well.
4 Choose The Suitable Counter Weight
If the smartphone still leans to the
tilting axis direction, after adjust
the center of gravity, please replace
the counter weight cover with the
counter weight module. Please refer
Tilting to the left showing photo. Try to keep
Axis the center of gravity balance after
mounting the counter weight module.
* 5
Heavy
Power On/Off
Check whether the phone is installed
well, and long press the function
button for two seconds to turn on
0 mm
the gimbal. Long press the function
button for three seconds to turn off
the gimbal.
Indicator Indicator
Roll Axis
Indicator Explanation Indicator Explanation
Rolling Axis
LED Status LED Status
Blue light flashes Blue light flashes
three times three times
Blue light flashes Blue light flashes
twice twice
Function Interface Function Interface
Blue light flashes Blue light flashes
once once
Blue light keeps Blue light keeps
flashing flashing
When the red LED indicator light flashes When the red LED indicator light flashes
in use, it means the gimbal is out-of-order in use, it means the gimbal is out-of-order
3
Optional Accessories
EN
Version 1.0
Charger
Input: DC 5V
Output: DC 4.2V
4
Operating
Function Button
Identify the working mode
via switch to different status
of the indicator light.
Use for switching working modes.
Other Functions
Special Working Condition （Inversion Mode）
enters into the inversion mode and automatically switches to the Panning mode. Invert the gimbal, put the camera face down, and combine with
the three working modes of handheld gimbal to capture the wonderful moments. The gimbal can restore to the boot-up state by consecutively
pressing the function button for three times under inversion mode.
Manual Pulling Locking
mode and lock mode. Adjust the tilt angle to the desired position and wait for 0.5 second until the gimbal registers the new angle. Function Button
Reset
Consecutively press the function button for four times to restore to the boot-up state. Identify the working mode via
switch to different status of the
indicator light.
Use for switching working modes.
Operation
Single tap
Special Working Condition (Inversion Mode)
Double tap
Triple tap
Quadruple tap
Hand Pulling Locking
pulling the pitching to the desired angle and stay 0.5 second it will lock in the current angle. Long Press For 3 Second
Under any working mode, single tap the function button, the indicator LED is always on, the Gimbal can be
*
【 Lock Mode 】
enter the 【 Lock Mode 】. During the LOCK MODE other operation is arbitrary.
5
Firmware Upgrade And Other Settings
Please
!
Remove The
Explain Explain Batteries Before
Upgrading
Full Power Full Power
Enough Power Enough Power
Firmware Upgrade Instruction Firmware Upgrade Instruction
Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest
Low Power Low Power firmware then unzip the RAR file.Remove the batteries and refer to the connection diagram to connect the gimbal with the computer. firmware then unzip the RAR file.Remove the batteries and refer to the connection diagram to connect the gimbal with the computer.
Please refer to the manual of update operation to upgrading,otherwise the Gimbal will be abnormal. Please refer to the manual of update operation to upgrading,otherwise the Gimbal will be abnormal.
Attention : Please be sure to connect the computer with the USB connector. Attention : Please be sure to connect the computer with the USB connector.
No Power No Power
Gimbal Calibration Gimbal Calibration
The Gimbal attitude can be calibrate through parameter setting software. User can adjust the pitch and roll in a small angle to achieve more The Gimbal attitude can be calibrate through parameter setting software. User can adjust the pitch and roll in a small angle to achieve more
accuracy filming scene. Please insert the batteries then refer to the connection diagram to connect the gimbal with the computer for caliration. accuracy filming scene. Please insert the batteries then refer to the connection diagram to connect the gimbal with the computer for caliration.
Attention : Please be sure to connect the computer with the USB connector. Attention : Please be sure to connect the computer with the USB connector.
Rechargeable
USB Connector
Battery
USB Cable
Type: 18350
Basic Working Modes
Panning Mode
Panning and
Tilting Mode
The smart phone stays in its current orientation.
Lock Mode
All panning, tilting and rolls are restricted.
Under any working mode, consecutively press the function button for three times, the gimbal
After the gimbal has been powered on for eight seconds, the tilt angle can be adjusted manually in the panning
Working Mode Instructions
Heading Follow Mode：Camera Pitch and Roll Angles
1.
remain constant, heading follows the handheld position.
Function Button Operation Instructions
Heading And Pitch Follow Mode：Camera Roll Angle remains
2.
constant. Heading and Pitch follow the handheld position.
LED Status Function
Remark
Single Flashes / Panning Mode /
Single tap to switch between panning mode and lock mode.
On Constantly
Lock Mode*
Double Flashes Under panning and tilting mode, single tap to switch to lock mode
Panning and Tilting Mode
Single Flashes Inversion Mode Can switch in other mode, or trip again to exit and reset
Single Flashes Reset Reset the tilting axis of the gimbal to initial orientation and initial mode
The pitching can be adjust by hand pulling after start the gimbal 8 seconds. During the Heading Follow Mode
Single Flashes Standby Single tap again to activate
Function
USB Cable
Interface USB Cable
Function Interface
Attention: Be sure to connect the computer with the USB connector
Be sure to connect the computer with the USB connector
Attention:
Heavy
Light
Counter Weight
Counter Weight
Weight: 52 g Weight: 6 g
The smart phone is allowed to pan left or right.
Vertical tilts or rolls are restricted.
The smart phone is allowed to pan left or right
and tilt up and down. Rolls are restricted.
Upgrade........
Upgrade........
USB Connector
USB Connector
PC
PC