3-axis handheld gimbal for smartphone compatible with iphone 6s plus/ 6s/ 6 plus/ 6/ 5s/ 5c/ 5/ 4s/ 4 and other smartphones with similar dimensions (2 pages)
3-axis video stabilized handheld gimbal for iphone 7 plus / 7 / 6s plus / 6s / 6 plus / 6 / se / 5s / 5c / 5 (16 pages)
Summary of Contents for FeiYu Tech G3Ultra
Page 1
8.1 operation system provisionally. 1. Please download the USB Driver and the “FY-G3-SETTING” software on the official website of Feiyu Tech, then install the “USB Driver”. Please refer to the following diagram connect the USB data cable with the USB connecter first.
Page 2
G3Ultra 3-Axis Handheld Gimbal SETTING Manual 4. The interface of the setting software as follows. 5. Make the connection between the gimbal and the setting software. (1) Install the camera well firstly. Gimbal place on stationary flat and keep motionless.
Page 3
G3Ultra 3-Axis Handheld Gimbal SETTING Manual (3) Keep the gimbal static. The other terminal (Mini- USB terminal ) of the USB data cable connect to the function interface on the gimbal and keep it static until current parameter read out completely.
Page 4
G3Ultra 3-Axis Handheld Gimbal SETTING Manual 6. Operation of attitude calibration. (1) After connect success and read out the current parameters completely, turn on the power switch to power supply the gimbal. (2) Pick up the gimbal, click on Start button, wait for the motors enter the working state.
Page 5
G3Ultra 3-Axis Handheld Gimbal SETTING Manual Configuration the heading following mode (1) When work in the following working mode, three following modes can be select for G3Ultra 3-Axis Handheld Gimbal. “SLOW”: The max following velocity can be reach 30°/S; “NORMAL”: The max following velocity can be reach 60°/S;...
Page 6
G3Ultra 3-Axis Handheld Gimbal SETTING Manual (2) If the gimbal only need to configure heading following mode, it don’t need to start the motor after connect success. Please operate step 7 directly. (3) The Save button in the Attitude Correction column only effective for the “attitude correction”...