Changing The Main Fuse - KTM 450 SX-F 2017 Owner's Manual

14 ELECTRICAL SYSTEM
14.4

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the seat.
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
The charging time may be longer at low temperatures.
This battery charger is not suitable for the trickle charging of lithium-ion batter-
ies.
–
Switch off the battery charger after charging and disconnect from the battery.
(XC‑F US, SX‑F Factory Edition)
–
Check the battery voltage.
» Battery voltage: < 9 V
–
–
» If the specifications have been met:
Battery voltage: ≥ 9 V
–
S00863-10
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
The charging time may be longer at low temperatures.
This battery charger is not suitable for the trickle charging of lithium-ion batter-
ies.
–
Switch off the battery charger after charging and disconnect from the battery.
Finishing work
–
Install the battery.
–
Mount the seat. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Info
Never remove cover
Do not charge the battery.
Replace the battery and dispose of the old battery properly.
Recharge the battery.
Guideline
Maximum charging voltage
Maximum charging current
Maximum charging time
Charge the battery regularly when
the motorcycle is not in use
Ideal charging and storage tem-
perature of the lithium-ion bat-
tery
Info
Never remove cover
( p. 81)
p. 50)
p. 50)
1
.
14.4 V
3.0 A
12 h
6 months
10... 20 °C (50... 68 °F)
1
.
83