Checking The Engine Oil Level - KTM 450 SX-F 2017 Owner's Manual

17 SERVICE WORK ON THE ENGINE
17.2

Checking the engine oil level

Info
The engine oil level can be checked when the engine is cold or warm.
(XC‑F US)
–
Clean plug-in connection
–
Disconnect the plug-in connection of the fuel line.
–
Pull fuel screen
–
Insert the new fuel screen all the way into the connecting piece.
–
Lubricate the O-ring and connect plug-in connection of the fuel line.
V00319-10
–
Start the engine and check the response.
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
Condition
The engine is cold.
–
Check the engine oil level.
The engine oil reaches the middle of level viewer
» If the engine oil does not reach the middle of the level viewer:
–
Condition
The engine is at operating temperature.
F00127-10
–
Check the engine oil level.
The engine oil level is between the middle of the level viewer
upper edge of the level viewer
»
If the engine oil does not reach the middle of level viewer
–
1
of the fuel line thoroughly with compressed air.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the
fuel line clogs the injection valve!
Info
Remaining fuel may flow out of the fuel hose.
2
out of the connecting piece.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
–
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
Add engine oil. ( p. 97)
Info
After switching off the engine, wait one minute before checking the
level.
B
Add engine oil. ( p. 97)
A
.
.
A
94
A
and the
: