Encoder Statistics; Privacy Masks - Bosch AUTODOME IP 4000i User Manual

AUTODOME IP 4000i/AUTODOME IP 5000i/
AUTODOME IP 5000i IR
Profile number
Profile 8
Note: Non-recording profiles (streams) are I-frame only.
JPEG stream
Select the resolution, frame rate, and image quality parameters for the M-JPEG stream.
–
–
–
Note: The M-JPEG frame rate can vary depending on system loading.
6.9

Encoder Statistics

Stream
Identifies the current stream (1, 2, or JPEG).
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
6.10

Privacy Masks

Note: The sequence of fields in the GUI may not match the sequence of the fields in this
section of the User Manual. In this section of the User Manual, fields appear in a more logical
functional sequence, identifying the sequence to create a new privacy mask, and then to
update a privacy mask.
Privacy Masks block specific areas of a scene from being seen in the camera's field of view.
This can be useful when public spaces are in the coverage area or monitoring will be limited to
a particular zone.
The areas covered are indicated by a colored pattern (Black, White, or Gray) in the video
image. The activated masked areas are filled with the selected pattern in live view.
You can define a total of twenty-four (24) privacy masks in the camera.
A total of eight (8) masks can be in view at the same time.
Privacy mask
Select the number of the Privacy mask. A colored rectangle appears in the unlabeled video
preview window above the Set button.
Use the mouse to define the area for each privacy mask.
Privacy Masks can have multiple corners (which are blue in the preview window) and can
form any convex shape.
The default mask template has four corners. You can add or delete corners as needed:
–
–
–
–
Bosch Security Systems
Default Profile name
3G Optimized
Property: Select the appropriate resolution.
Max. frame rate: Select one of the following frame rates to be the maximum: 1, 3, 5, 6,
7.5, 10, 15, 25, 30, or 60 fps.
Picture quality: This setting allows you to adjust the quality of the M-JPEG image. Use
the slide bar to choose a quality between Low and High.
To add a corner, double-click the side of the mask where you want to add the corner.
To delete a corner, double-click the corner to remove.
To amend the shape of a zone, place the cursor over the edge of the zone, hold down the
mouse button and drag the edge of the zone to the required position.
To reposition a zone, place the cursor over the zone, hold down the mouse button and
drag into position.
Description
Ideal for encoding on a 3G uplink where bit rate
limitations are critical.
User Manual
Camera | en 35
2018.05 | 1.1 |