Cleaning The Pick Tires - Codonics Horizon User Manual

`äÉ~åáåÖ=íÜÉ=máÅâ=qáêÉë
8
1. Press the
state.
To clean the
pick tires
The Status screen should indicate that the imager is paused.
2. Remove the receive trays, as shown in the following figure.
WARNING With the receive trays removed, touch only those internal
components that are colored green (refer to the figure on page xxxii). Remove
rings, ties, jewelry, and other items, and tie back hair, so that they do not fall into
or get caught in the imager.
PAUSE key, and wait until the imager enters the Paused
Horizon Imager User's Manual
Receive
trays
10-13