0718 [Folding Unit Tray Full Detection]; 0719 [Number Of Sheets Folded After Full Detection] - Ricoh PRO C7200 Operating Instructions Manual

Setting Items
[A3 SEF]
[B4 JIS SEF]
[A4 SEF]
[B5 JIS SEF]
[11 × 17 SEF]
1
[8 / × 14 SEF]
2
1
[8 / × 11 SEF]
2
[8K SEF]
[Other Paper Sizes]

0718 [Folding Unit Tray Full Detection]

Set whether to detect if Folder Tray is full of output sheets. By setting to [On], it continues printing up to
[Number of Sheets Folded after Full Detection], then shows a message.
Setting Item
[Setting]

0719 [Number of Sheets Folded after Full Detection]

Set number of sheets which activates message Folding Tray is full. Setting a large number delays
message and raises productivity, but may cause disarrayed stack of output sheets and paper jam.
• If the display of the warning message is delayed, the paper delivered to the folding unit tray may
not be stacked properly or the delivered paper may block the paper exit and cause subsequent
paper to be misfed.
Default Max.
Value Value
0.0 4.0
Values
[On]
[Off]
[Finishing: Fold]
Min.
Step
Value
-4.0 0.2
Default Value
[On]
Unit
mm
79