1103 [Image Position Feedback Correction]; 1104 [Image Position Feedback Correction: Gap] - Ricoh PRO C7200 Operating Instructions Manual

1103 [Image Position Feedback Correction]

[Correction Mode]
Select the mode for Image Position Feedback Correction. If [Detection Mark] is selected, a mark will be
printed on each corner of the page. Select [Correction Off] if marks are not required.
Setting Item
01: Setting

1104 [Image Position Feedback Correction: Gap]

[Image Position: Side 1]/[Image Position: Side 2]
Fine-adjust the correction amount for Image Position Feedback Correction (Side 1/2).
Setting Item
01: Across Feed/02: With Feed/03:
Across Feed/04: With Feed
[Image Magnification: Side 1]/[Image Magnification: Side 2]
Fine-adjust the correction amount of magnification for Image Position Feedback Correction (Side 1/2).
Setting Item
05: Across Feed/07: Across Feed
06: With Feed/08: With Feed
[Trapezoidal Distortion: Side 1]/[Trapezoidal Distortion: Side 2]
Fine-adjust the magnification of trailing edge with across feed direction for Image Position Feedback
Correction (Side 1/2).
[1: Correction Off]
[2: Detection Mark: Back]
[3: Detection Mark: Front & Back]
Max. Value Min. Value
3.00 -3.00
Max. Value Min. Value
0.500 -0.500
[Machine: Image Position]
Values
Step Unit
0.01 mm
Step Unit
0.001 %
0.025
101