1233 [Fusing Pressure Temperature] - Ricoh PRO C7200 Operating Instructions Manual

Setting Item
63: Init Sht Intvl: Low: Clr/Sp/64: Init Sht
Intvl: Low: White/67: Init Sht Intvl:
Clr/Sp/68: Init Sht Intvl: White
[S: Fuser Setting HQ]
Under the following conditions, adjust heat roller temperature, temperature correction, and initial sheet
interval.
Printing using Special Color Only
High Quality is applied in DFE Setting
Setting Item
71: Heat Roller Temp: Clr/Sp/72: Heat
Roller Temp: White
75: Corct Temp: Init Fd: Clr/Sp/76: Corct
Temp: Init Fd: White/79: Corct Temp: Pre-
Fd: Clr/Sp/80: Corct Temp: Pre-Fd: White
83: Init Sht Intvl: Low: Clr/Sp/84: Init Sht
Intvl: Low: White/87: Init Sht Intvl:
Clr/Sp/88: Init Sht Intvl: White

1233 [Fusing Pressure Temperature]

[BW/FC/FCS]
Under the following conditions, adjust pressure roller temperature.
Black & White Printing /Full Color Printing/Full Color Printing including Special
High Quality is not applied in DFE Setting
Setting Item
01: Press Rlr Temp: BW/FC/FCS
Max. Value Min. Value
3 0
Max. Value Min. Value
200 100
30 0
3 0
Max. Value Min. Value
200 50
[Machine: Image Quality]
Step Unit
1 None
Step Unit
1 deg
1 deg
1 None
Step Unit
1 deg
113