Accessories - Generac Power Systems 20 kW Synergy Owner's Manual

Accessories

NOTE: Performance enhancing accessories are available for air-cooled generators. Contact an IASD or visit
www.generac.com for additional information on replacement parts, accessories, and extended warranties. See also
http://www.ordertree.com/generac/air-cooled-homestandby-generators/.
Accessory
Cold Weather Accessories*—
•
Battery Pad Warmer
•
Oil Warmer
•
Breather Warmer
* each sold separately
Scheduled Maintenance Kit
Auxiliary Transfer Switch Lockout
Fascia Base Wrap
Touch-Up Paint Kit
Wireless Local Monitor
Extended Warranty Coverage
Power Management Module (PMM) Power Management Modules are used in conjunction with the Smart Switch to increase its
PMM Starter Kit
Owner's Manual for 60 Hz Synergy™ Generators
•
Recommended in areas where temperatures fall below 0 °F (-18 °C).
(Not necessary for use with AGM-style batteries)
•
Recommended in areas where temperatures fall below 0 °F (-18 °C).
•
Recommended in areas where heavy icing occurs.
Includes all pieces necessary to perform maintenance on the generator along with oil
recommendations.
Enables any of the transfer switches to completely lock out one large electrical load by tying
into its control system.
The fascia base wrap snaps together around the bottom of the new air-cooled generators.
This offers a sleek, contoured appearance as well as offering protection from rodents and
insects by covering the lifting holes located in the base. Requires use of the mounting pad
shipped with the generator.
Very important to maintain the look and integrity of the generator enclosure. This kit includes
touch-up paint and instructions.
The Wireless Local Monitor is completely wireless and battery powered and provides owners
with instant generator status updates without ever leaving the house. Status lights (red,
yellow, and green) alert owners when the generator needs attention. Magnetic backing
permits refrigerator mounting and gives a 600 ft (183 m) line of sight communication.
Extend your generator warranty coverage by purchasing extended warranty coverage.
Covers both parts and labor. Extended coverage can be purchased within 12 months of the
end-users purchase date. This extended coverage is applicable to registered units and end-
user proof of purchase must be available upon request.
®
Available for Generac and Guardian
EcoGen™ products or all international purchases.
power management capabilities. It gives the Smart Switch additional power management
flexibility not found in any other transfer switch
The PMM Starter Kit consists of a 24 VAC, field installed transformer that enables the use of
the 24 VAC Power Management Modules (PMMs) and one PMM. The standard controller
(without starter kit) can control two HVAC loads with no additional hardware. This kit is
required if installing this unit in a home with a digital HVAC controls vs. the standard 24 VAC
system.
Description
®
products. Not available for PowerPact™ and
General Information
9