The AVP back panel is organized into groups of inputs and outputs for audio and video
as shown below.
1.
Power switch
2.
AC fuse holder
3.
AC input receptacle
4.
Video outputs
5.
Video inputs
6.
Digital inputs
7.
Send/RCV jacks
8.
Preouts
1. Power
switch -
For switching AC power to the AVP preamplifier. Off = O, On = I. The
rocker must be in the on (I) position for the preamplifier to operate.
2. AC fuse
holder -
Holds the AC Line fuse. Replace only with 0.5 A (½ A) 250 V fast blow
fuse.
3. AC input
-
receptacle
Rear panel view
Rear panel description
For attaching the supplied AC power cord to the preamplifier.
9. Analog audio inputs
10. AM antenna input
11. FM antenna input
12. Tape loop
13. V1 loop
14. V2 loop
15. CTRL OUT / IR IN jacks
16. Surround outputs
Page 8