P/N 13007 Rev; Rear Panel View; Rear Panel Description - B&K 7250 Owner's Manual

1. AC fuse holder
2. AC Input receptacle
3. Speaker outputs
1. AC fuse holder -
2. AC Input receptacle - For attaching the supplied AC power cord to the amplifier.
3. Speaker outputs -
4. Amplifier control muting input/output -
5. Level controls -
6. Inputs -

Rear Panel View

4. Amplifier control muting input/output
5. Level controls
6. Inputs
7. Speaker fuses

Rear panel description

Holds the AC Line fuse. This fuse is a 15 Amp / 250 Volt
Slow Blow fuse. Replace with same type and value fuse only.
For connecting the speakers to the amplifier. Explained further
on page 6.
To provide remote switching of mute on/off of the amplifier.
Explained further on pages (8 - 9).
For adjusting the input level of each channel into the amplifier.
There are five/six level controls on the back of the amplifier.
One level control for each channel.
For connecting signal patch cables (interconnects) from the
preamplifier to the amplifier to pass signal. Pages (5 - 6).
Page 4

P/N 13007 Rev.0004