Remote Control - B&K AVP1030 Owner's Manual

The B & K A/V system remote control is specially designed to streamline functions.
Although you can choose to use a universal remote, we think you will agree that the
remote shown below is simple and easy to learn.
Most buttons on the remote control are duplicated through the front panel. This means
it's easy to operate the preamplifier, whether you prefer using the remote control or the
hands on approach from the front panel. We recommend using the remote control for
simplicity. Use the table below to familiarize yourself with the remote controls functions.

Remote control

Button:
POWER OFF
POWER ON
SYSTEM MUTE
V1
TV-V3
FX
V2
TAPE
VLD
TUNER
CD
FREQ
BAND
STATION -/+
TUNE -/+
BALANCE L/R
MASTER VOLUME -
/+
Page 12
Function:
Turns power and CTRL OUT off
Turns power and CTRL OUT on
Suppresses sound output
Selects audio/video from component V1
Selects audio/video from component TV-V3
Lets you select between the standard Direct mode or
the last used surround mode
Selects audio/video from component V2
Selects audio from component TAPE
Selects audio/video from component VLD
Selects internal TUNER
Selects audio from component CD
Lets you directly tune in a station frequency by
specifying it with the numeric keypad
Selects AM or FM frequency band
Selects station preset by moving up (+) or down (-)
Manually tune a station by moving the frequency up (+)
or down (-)
Adjusts left/right level balance for front and rear
channels (inactive for Pro Logic and Dolby Digital
modes)
Lets you decrease (-) or increase (+) the volume on all
channels