Surround Modes - B&K AVP1030 Owner's Manual

Surround mode explanation

SURROUND MODES

DOLBY SURROUND
3 STEREO
3 STEREO HALL
STEREO
STEREO F/R
STEREO HALL
DIRECT
† Output configurations for each mode are limited by the speaker setup in the SETUP
menu.
CHANNELS DELAY
ON † RANGE
LF,RF,C,LR,RR 0 - 15 ms
SUB
15 - 30 ms
LF,RF,C,SUB
LF,RF,C,LR,RR 0 - 15 ms
SUB
15 - 30 ms
LF,RF,SUB
LF,RF,LR,RR
SUB
LF,RF,LR,RR 0 - 15 ms
SUB
15 - 30 ms
LF,RF,SUB
Page 21
AC-3 Mode-All speakers are full
or range. Dolby Pro Logic- Rear left and
right are mono surround and sent
through the delay.
0 ms Rear left and right signals mixed with
front left and right.
Rear left and right are mono surround
or and sent through the delay.
0 ms Stereo listening mode.
0 ms Front left is sent to the rear left and
front right is sent to the rear right.
SUB is the front left and right signals
summed.
Same as 3 STEREO HALL with no
or center channel.
0 ms Direct mode is the same as Stereo
mode except the 2 channel output
signal is pre-processor for analog
sources.(True Stereo bypass if using
analog inputs)
NOTES †