S
ETTING
The kit includes a UHF Pro remote control, batteries, an IR extender
cable, an IR clip, an AC adapter, a converter, and a UHF antenna.
Figure 4. Parts of the IR-to-UHF Pro Upgrade Kit
S
U
ETTING
1. Make sure you fully install the satellite TV system. See the satellite
receiver's User Guide.
2. Select a location for the converter that has access to a 110 V power
outlet and is close enough for the IR extender cable to reach the
satellite receiver.
3. Refer to Figure 5 to complete steps a through d.
a. Attach the antenna to the
on the back of the converter. You may need to
move the antenna around to find where it
works best.
U
K
P THE
S
P THE
IGNAL
Figure 5. Converter Back Panel
IT
C
ONVERTER
REMOTE ANTENNA
5