Receiver Upgrade; Setting Up To Switch The Tv To Watch Satellite Programming - Dish Network EZ User Manual

All manuals and user guides at all-guides.com
R U
ECEIVER PGRADE
Turn on your TV the way you normally would to watch
satellite TV programming. Using your DISH Network EZ
Remote Control, press
control to operate some basic satellite receiver features
like or
MENU GUIDE
your satellite receiver may need to get an upgrade from
the satellite. To receive this upgrade, turn off your
satellite receiver for 20 minutes. After completing the
upgrade, try using the remote control again to make sure it
works.
: Check the inside front cover of this guide to see if
Note
the remote control is compatible with your satellite
receiver.
: If you are installing the satellite receiver for the first
Note
time, you must use the remote control that came with your
receiver to guide the receiver through the installation
procedures, which includes getting the upgrade from the
satellite.
S U
ETTING P
W S
ATCH ATELLITE
The following instructions show you how to set up your
system and DISH Network EZ Remote Control so that
when you press
programming every time.
The first thing you will do is make the right connections
between the TV and satellite receiver. After that, you will
set up your remote control to work with your TV and then
set up .
118866
and then try using this remote
. If the remote control does not work,
S
TO WITCH THE
P
ROGRAMMING
the TV gives you satellite
TV
TO
5