Table of Contents
Advertisement
17 COOLING SYSTEM
218
–
Remove bleeder screw
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the vent
hole, and then mount and tighten bleeder screw
ately.
Coolant
–
Completely fill the radiator with coolant. Mount radiator
V01258-10
1
cap
.
–
Rest the vehicle on the side stand.
–
Check the coolant level in the compensating tank. (
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and run it until the 5th bar of the temperature
indicator lights up.
–
Stop the engine and allow it to cool down.
2
.
2
1.20 l
Coolant (
(1.27 qt.)
immedi-
p. 271)
p. 213)
Advertisement
Table of Contents
