Table of Contents
Advertisement
10 RIDING INSTRUCTIONS
Note
Transmission damage Incorrect use of the quickshifter+ will damage the transmission.
The quickshifter+ can only be used if the function is enabled in the combination instrument.
The quickshifter+ is not active if you pull the clutch lever.
–
Only use the quickshifter+ in the permitted speed range shown.
114
Info
If unusual noises occur while riding, stop immediately (taking care not to endanger yourself or other road
users in the process), switch off the engine and contact an authorized KTM workshop.
V01271-10
–
Shift into a higher gear when conditions allow (incline, road
situation, etc.).
–
Release the throttle while simultaneously pulling the clutch
lever, shift into the next gear, release the clutch lever, and
open the throttle.
Info
You can see the positions of the 6 forward gears in the
figure. The neutral or idle position is between the first
and second gears. First-gear is used for starting off or
for steep inclines.
The operating temperature is reached when 5 bars of
the temperature indicator light up.
Advertisement
Table of Contents
