KTM 790 DUKE 2018 Owner's Manual page 178

15 WHEELS, TIRES
176
–
Engage the thurst bearing of brake caliper support
swingarm.
–
Lift the rear wheel into the swingarm, position it, and insert
the wheel spindle.
The brake linings are correctly positioned.
–
Place the chain on the sprocket.
–
Position chain adjuster
it yet.
Info
Mount the left and right chain adjusters in the same
position.
–
Make sure that chain adjusters
adjusting screws. Tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
V01242-12
Nut, rear wheel spin-
dle
–
Position wheel speed sensor
–
Mount and tighten screw
B
2 3
. Mount nut , but do not tighten
2
are fitted correctly on the
3
.
C
.
M25x1.5 90 Nm (66.4 lbf ft)
4
in the drill hole.
5
.
and the