Launch-Control; Starting Off With Launch Control - KTM 790 DUKE 2018 Owner's Manual

Hide thumbs Also See for 790 DUKE 2018:
Table of Contents

Advertisement

10 RIDING INSTRUCTIONS
10.4
10.5
108
Launch‑Control
H02000-01

Starting off with launch control

Warning
Danger of accidents Launch control enables very powerful acceleration which may ask too much of a
novice rider.
Only use the launch control if you have the appropriate experience.
Do not use launch control on public roads.
Launch Control is a vehicle electronics function.
Launch control adjusts the engine speed in order to achieve the
best possible acceleration.
Launch control can be used for starting off for a maximum of three
times in succession. Launch control is temporarily deactivated
after the third starting off in order to protect the engine, transmis-
sion and cooling system from overloading.
Launch control is also deactivated if all conditions for activation
are no longer met.
Launch control is enabled again in the following cases: the engine
runs for at least three minutes, the engine is switched off for 20
minutes or a distance of 1.5 km (0.93 mi) has been covered.

Advertisement

Table of Contents
loading

Table of Contents