Transcendent 6 MegaPixel Fisheye Camera
Go to PTZàProtocol interface as shown below.
Here the protocol and baud-rate must be the same with these of the keyboard.
Address: 1; you can control PTZ channel 1 by using this address in the keyboard.
Address: 2; you can control PTZ channel 2 by using this address in the keyboard.
......
3.4
Alarm Configuration
Alarm configuration includes four submenus: Motion Detection, Alarm In, Alarm Out and
Alarm Server.
3.4.1 Motion Detection
Go to AlarmàMotion Detection to set motion detection alarm.
1. Check "Enable Alarm" check box to activate motion based alarm, choose alarm holding time
and set alarm trigger options.
22