Servicing double-insulated products
(230V-240V)
In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means are provided on a double-insulated product nor should
a means for grounding be added to the product. Servicing a double-insulated product
requires extreme care and should only be done by qualified service personnel with
knowledge of the system under his or her responsibility. Replacement parts for a double-
insulated product must be identical to those parts in the product. The symbol is marked
on the double-insulated product.
Notice about the incandescent lamp
The incandescent lamp fitted to our product is not suitable for household lighting and is
specifically designed for the lighting of the sewing machine sewing area.
Troubleshooting
What is the problem? Check the following possibilities before contacting the service
center for repair.
Trouble
The power plug is not
inserted
The main power switch has
been turned off
Machine
Thread is tangled in the
does not
rotary hook, or there is a
work
broken needle in the rotary
hook
The thread winding spindle
has been pushed to the right
Machine very
There is lint or fluff in the
noisy & very
rotary hook or feed dog
slow
Cause
Countermeasure
Connect the power plug
correctly
Turn on the sewing machine
Clean the rotary hook
Push the thread winding
spindle to the left
Remove the lint or fluff from the
rotary hook or feed dog
4
Page
12
12
42
14
42
49