Table of Contents
Advertisement
HOW TO....
REFER TO SCHEMATICS / DIAGRAMS IN THE APPENDIX FOR MORE DETAILS
How To Change A Fan:
1. DISCONNECT FROM MAINS SUPPLY.
2. Move to a flat position and remove BOTTOM COVER.
3. Disconnect the EARTH LOOM and remove the COVER.
4. Remove the FAN EARTH LOOM from the EARTH POINT (THIN GREEN/YELLOW).
5. Remove the BLACK WIRE from the terminal block.
6. Remove the BROWN WIRE from the terminal block.
7. Remove the PURPLE WIRE from the terminal block.
BLACK
BROWN
PURPLE
8. Remove the BLACK WIRE from its CRIMP.
9. Remove the BROWN WIRE from its CRIMP.
10. Remove the loom from the clip holding the loom to the chassis.
11
Advertisement
Table of Contents
