Table of Contents
Advertisement
CE mark
All products that are produced by JEM / Martin carry the CE Certification.
These products meet the requirements of the following EC Standards and as such, comply with the EMC
(Electromagnetic Compatibility) and LVD (Low Voltage Directives), directives of the European Community:
EN 50 081-1 1992
Generic Emission Standard for domestic and light Industrial environments.
EN 50 082-1 1992
Generic Immunity Standard for domestic and light Industrial environments.
EN 60 335-1 1995
Safety of household and similar electrical appliances
These standards reference the following European standards:
Emissions:
EN 55 022 /B
EN 60 555
EN 55 014
Immunity:
IEC 801-2
IEC 801-4
These standards also meet the requirements of CISPR 22.
JEM did not carry the CE mark on products that were produced prior to 1995.
These products can be identified by either the DIN/XLR socket on the rear or top of the unit or the Mains PCB:
If the unit has a 5 pin DIN or a 4 pin XLR without the CE text on the rear, the unit is classed as NON-CE.
If the PCB has a 12 pin Molex connector fitted to it, this is classed as a NON-CE unit.
RF voltage and field strength
Harmonic current content
RF voltage (discontinuous)
Electrostatic discharge to case
Common mode fast transients
4
Advertisement
Table of Contents
