Deleting A Transmitter - EMS iris+ Installation Manual

Deleting a transmitter

To delete a transmitter, access the Main Menu by following the operations listed under the
'Accessing the engineering
previous
Now, follow the steps listed below:
Press the
display:
Press the
1
Press the
to display:
Press the 1
Press the
display:
Press the
1
Enter the transmitter number to be deleted and the
screen will change to (screen shown for Handpush 001):
Press 1 (one) to accept and the screen will change to:
Press any key and you will return to the delete transmitter
menu.
Repeat the above steps for any further transmitters to be deleted, or press the
to escape to the main menu.
menus' section.
button four times. The screen will now
button. The screen will change to display:
button seven times. The screen will change
button. The screen will change to display:
button once. The screen will change to
button. The screen will change to display:
Page 20 of 32
| Time and Date
> Radio Setup
| Output Setup
2 = Help 13: 51
| ** Radio Setup ** |
> Add Transmitter
| Txer Details
2 = Help 13: 51
| Reinstate Transmitter |
| Test Routines
> Delete Transmitter <
2 = Help 13: 51
> Delete Transmitter <
| Delete by Number |
| Delete by Tx
2=Help 13: 51
| Delete Transmitter |
> Delete by Number <
| Delete by Tx
2=Help 13: 51
Enter Transmitter
Number: _
= Done = Del 13: 52
Hand Push 001
Delete ?
1=Yes 0=No 13: 52
Hand Push 001
Deleted
Press Any Key 13: 52
button three times
3
|
<
|
<
|
|
|
|