Pro Tools Hd Aim; Pro Tools Hd Aim Requirements - Apogee Symphony I/O User Manual

Pro Tools HD AIM

Pro Tools HD AIM Requirements

Requirements when connecting to Avid Pro Tools PCI cards:
• Avid Pro Tools HDX, HD Native (PCI card or Thunderbolt box), HD Core, HD Process, HD Accel, or
• Using Symphony I/O with HDX or HD Native (PCI card or Thunderbolt box) requires either a mini-
• Pro Tools 8.1, 9.0 or greater, 10.0 or greater, 11.0 or greater, 12.0 or greater,
Note- Pro Tools HD version 12.6 and greater requires a DigiLink I/O license to use 3rd-party interfaces.
Digital audio and clock configuration data, such as the session sample rate and hardware clock source, is transmitted via
the PC-32 cable (referred to as a DigiLink cable in Pro Tools documentation). Software control data between Symphony I/O
and Apogee Maestro software
Requirements for connecting to USB for software control from Apogee Maestro:
• mac OS Mavericks 10.9.5 or greater (64-bit and 32-bit kernel modes)
• 4GB minimum RAM, 8GB recommended
• USB port (2.0, 3.0, 3.1, or USB-C with an Apple USB-C to USB 2.0 adapter)
Connect Symphony I/O's USB port to a USB port on your Apple Mac to set these parameters in Maestro:
• Calibration
• Meter Configuration
• Digital I/O format
• Mic Pre settings such as phantom power, high pass (if a Mic Pre I/O Module is installed)
Once settings have been completed, USB may be disconnected, as it's not required for operation with Pro Tools.
These Symphony I/O parameters may be set using the front panel encoders:
• Speaker and Headphone Output Levels;
• Mic Pre Input gain (if a Mic Pre I/O Module is installed).
These parameters are set from Pro Tools software:
• Clock Source and Sample Rate;
• Audio routing.
Symphony I/O - User's Guide
HD Accel Core card installed in a computer in accordance with the Pro Tools HD Compatibility
Grids, available at www.avid.com
DigiLink to Female DigiLink adapter and a PC32 (DigiLink) cable or a PC32 (DigiLink) to Female
mini-DigiLink adapter and a mini-DigiLink cable.
Pro Tools Ultimate 2018 or greater.
Information available at http://www.avid.com/licenses/pro-tools-digilink-io-license
is transmitted via a USB connection.
Page 39