Mastech MS3300 Operator's Instruction Manual

AC / DC CURRENT TRANSDUCER
OPERATOR'S INSTRUCTION MANUAL
AC / DC CURRENT TRANSDUCER
1. Safety Information
The AC/DC current transducer has been designed
according to IEC-1010 and IEC1010-2-032 concerning
safety requirements for electrical measuring instruments
and hand-held current clamps with an over voltage
category (CAT II) and pollution 2.
Follow all introductions and operating requirements to
insure that AC/DC current transducer is used safely and
is kept in good operating condition.
1.1 Symbols
Important safety information,
refer to the operating manual.
Double insulation ( Protection
classII)
01
AC / DC CURRENT TRANSDUCER
2. Description
Refer to the Figure 1. And to the following numbered steps
to familiarize yourself with the AC/DC current transducer
Transformer Jaws
Designed to pick up the ac. or dc current
1
following though the conductor.
Hand Guard
2
Designed to protect user for safety.
Trigger
3
Press the lever to open the transformer jaws.
DCA ZERO
Adjusting the DCA ZERO knob, when the
4
display is not zero reading for doesn't
measurement before.
5 Power On indication
Function Switch
6
Select the ac or dc current.
Output Plugs
7
02
AC / DC CURRENT TRANSDUCER
03