Globalsat GTR-388 Quick Start Manual

Motorcycle/ Vehicle Tracker
Quick Start Guide
(
GSM/DCS/WCDMA
1.4 Appearance
1
4
3
3
3
3
2
LED
1
2 Reset button
3
For fixing device with Velcro tape
Screws of back cover
4
1.5 LED indicator
LED status Description
Red blinking Device is being boot but SIM card isn't ready
Red solid SIM card is ready, but not register to network
Yellow solid Registered to network, but not connected to server
Registered to network, and connected to server
Green solid
Hiding mode: Device would blink red light while it is booting up.
After completing the boot, the LED would go off.
CONTENT
1.Introduction .......................................................................................... 2
1.1 Introduction ....................................................................................... 2
1.2 Features ............................................................................................ 2
)
1.3 Hardware specification ........................................................................ 3
1.4 Appearance ........................................................................................ 4
1.5 LED indicator ...................................................................................... 4
1.6 Cable description ................................................................................ 5
1.7 Accessories ........................................................................................ 6
1.7.1 Standard Items ................................................................................ 6
1.7.2 Optional Items ................................................................................. 7
2.Operation .............................................................................................. 8
2.1 Install the SIM card ............................................................................. 8
2.2 Connect the Main Cable ...................................................................... 9
2.3 Connect the Main Power ...................................................................... 9
2.4 Switch on/off Tracker .........................................................................10
2.5 Fix the device ....................................................................................10
3.Installation............................................................................................11
3.1 Installing the Emergency button .........................................................11
3.2 Connecting ignition detection line on car .............................................12
3.3 Connecting Relay ...............................................................................13
3.4 Installation reminder ..........................................................................14
1.6 Cable description
Analog Input
(Blue)
SOS
(Green)
4
Ground
(Black)
Out Input
(White)
Wire Color Description
Green SOS (Negative Trigger)
Blue Fuel sensor input (Analog Input, 0~28 V,
12 bits resolution)
Yellow Digital Input (Negative Trigger)
Red Main Power, 9~36 V
Black Ground
White Digital Output (Negative Trigger), 300 mA
Orange Ignition Detection Input (Positive Trigger)
Black Ground
04
1. Introduction
1.1 Introduction
The tracker is designed as a durable and multi-functional 3G GPS
tracker. It integrates highly sensitive GPS module and 3G communication
module with a powerful microcontroller that fits into a compact
enclosure. The device is capable of being waterproof and ideal for use
in a motorcycle, golf carts and vehicles. It provides real-time GPS
positions anytime and anywhere with an open view to the sky, and
offers precise positioning, and reports vehicle status to the server with
necessary information shown on the map. Benefits such as enhanced
fleet management, improved vehicle safety, emergency response, are
all accomplished through the implementation of the tracker system. Also
built-in 3G and GPS antennas are for easy installation without hassle.
1.2 Features
● AGPS support
● Support communication protocols- SMS/TCP/UDP.
● Multiple I/Os support: 1 Digital Input for custom function, 1 Digital
input for optional Emergency button, 1 Analog Input for fuel sensor, 1
Digital Output for Relay, 1 Digital Input for ACC detection.
● Firmware update via Over-The-Air
● Alert functions including Power low/ Over speed/ Movement alarms
● Tracking by preferred interval, scheduling and Geo-fence
● Multiple power solution
● IPX7 design
01
1.7 Accessories 1.7.1 Standard Items
Input Negative
(Yellow)
Main Power
(Red)
Ground
(Black)
Ignition Detection Input
(Orange)
Main Unit
Main Cable
05
1.3 Hardware specification
Description
Item
Model US
Back-up Battery Li-Polymer 820mAh
Operation
Temperature
Storage
Dimension 107.5 mm X 38.7 mm X 23.5 mm
GPS Receiver high performance GPS chipset
GSM/GPRS/EDGE:
850/1900MHz
Communication
UMTS/HSPA+:
850/1900MHz
GPS Antenna Built-in patch ceramics antenna
GSM Antenna Built-in Monopole Antenna
Protocol SMS/GPRS (TCP/UDP)
Power 9V~36V
Built-in Memory 32 Mb
Emergency Input Negative trigger x 1
Ignition (ACC) Input Positive trigger x 1
Digital Input Port Negative trigger x 1
Digital Output Port Negative trigger x 1 (300mA)
Analog Input x 1( 0~28V), 12 bits resolution
Fuel sensor Input Port
Sensor Motion sensor
Humidity 5% to 95% Non-Condensing
Weight 66.5g
02
1.7.2 Optional Items
External Emergency Button
Hardwire cable
Velcro Tape X2
06
Europe Global
-30°C ~ + 60°C
(0°C ~ + 45°C for charging)
-40°C to +60 °C
GSM/GPRS/EDGE: GSM/GPRS/EDGE:
900/1800MHz 850/900/1800/1900MHz
UMTS/HSPA+: UMTS/HSPA+:
900/2100MHz 800/850/900/1900/
2100MHz
03
12V/24V Relay
OBDII Power Cable
Configuration Cables
07