Table of Contents
Advertisement
6. Mechanical adjustment
4. After the bypass paper size unit base has been mounted, check that the lever of the
bypass paper size unit moves smoothly in a manner operatively connected to the
bypass guide.
5. Call the Service Mode to the screen and select [Machine]
Adjustment]. Then, carry out manual bypass tray adjustment.
See P.17
20
3. When the bypass paper size unit
base is mounted, align the lever
position of the bypass paper size unit
with the tab at the center in a straight
line.
4038F3C512DA
Service Manual
Field Service Ver. 1.0 Jun. 2008
[Manual Bypass Tray
Y109730-6
Advertisement
Table of Contents
