Mitsubishi Electric VL-50S2 Handbook page 31

(9) Remove the shutters.
• Remove the shutters (for supply/exhaust air) from
the casing.
Reassembly precautions
• Make sure that the shutter (for exhaust air) is
securely hooked on the claws and hollows of
the casing. (Three locations, indicated by
• Make sure that the shutter (for supply air) is se-
curely hooked on the claws and protrusions of
the casing and shutter (for exhaust air). (Three
locations, indicated by )
When reassembling
Reassemble the unit in the reverse order of disas-
sembly.
After reassembly, always make a test run to make
sure that the unit operates properly.
)
─ 31 ─
Shutter (for exhaust air)
Shutter (for supply air)
Casing